TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
Using diagonal cutting pliers, cut safety wire
(A) and remove it from bushing (B) and bracket
Using 3-1/8 inch socket and T-slide wrench,
remove bushing (B) from bracket (C).
3. Using resilient mount tool assembly,
remove two mounts (D) from bracket
4. Using 1/2 inch square drive bit screwdriver
and 1/2 inch drive ratchet to hold screw
(E), use 1 1/4 inch open end wrench
to remove nut (F) from screw (E).
5. Remove screw (E) and roller (G) from
6. With second man using 1-1/2 inch open
end wrench to hold bolt (H), use 1-1/2
inch socket, ratchet, and extension
to remove nut (J) from bolt (H).
Remove washer (K) and bolt (H) from
Go on to Sheet 3