TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 4)
It may be necessary to turn universal to
gain access to screw (L).
Using 3/4 inch socket and ratchet, remove
three screws (L) and washers (M) from bracket
Remove bracket (C) from transmission.
Using hammer, remove spacer (N) from
CLEANING AND INSPECTION:
Inspect bushing, mounts, and roller for damages.
If any parts are nicked, burred, or out of round,
replace damaged part.
Clean all parts with drycleaning solvent and
wipe dry with rags.
1. Position bracket (A) in vise and using
resilient mount tool assembly, install
two mounts (B) into bracket (A).
2. Using 3-1/8 inch socket and T-slide
wrench, install bushing (C) into bracket
Go to Sheet 4