CRANKCASE BREATHER TEE AND REAR TUBE REPLACEMENT (Sheet 2 of 6)
Using screwdriver, loosen two clamps (A)
holding breather tube (B) to exhaust tube
(C) and breather tee (D).
Remove breather tube (B) from tank.
Using screwdriver, loosen clamp (E).
Using 1/2 inch wrench, remove two screws
and washers (F) holding breather tee (D)
Remove breather tee (D), spacer (G) and two
g a s k e t s (H) from engine. Throw gaskets away.
U s i n g screwdriver, loosen clamp (J).
Remove clamps (E), (J), and hose (K) from
b r e a t h e r tee (D). Throw hose (K) away.
Go on to Sheet 3