FUEL INJECTOR NOZZLES AND HOLDERS INSPECTION (Sheet 2 of 2)
Do not exceed 700 to 750 rpm and do not run engine for more than 10
minutes at a time. Before restarting, allow engine to cool.
Place hand between nozzle heads (A) and top of holders (B) on each fuel injector.
If movement is felt, stop engine and notify support maintenance.
Using 1-1/4 inch socket, remove nut (C)
and spacers (D) from fan drive shaft (E).
Install engine access cover (left bank)
Install engine access cover (right bank)
End of Task