AIR CLEANER REPLACEMENT (Sheet 7 of 8)
Using 9/16 inch socket, install two
locknuts (J) and washers (K) to hold
fender skirt (H) to both outriggers.
Lubricate four screws (L).
Using 9/16 inch socket, install four
screws (L) and washers (M) to hold
fender skirt (H) to air cleaner (N).
Using torque wrench and 9/16 inch
socket, tighten four screws (L) to
25 to 30 lb-ft (34 to 41 N·m).
Install washer (P) and bolt (Q) from top of fender skirt.
Install all bolt (Q) through washer (P) and fender skirt.
If right air cleaner is being installed, do steps 15 and 16 and then goon to step 17. If left air
cleaner is being installed skip steps 15 and 16.
Place washer (R), lockwasher (S), and nut (T) on bolt (Q). Using 9/16 inch socket on
bolt (U) and 9/1 6 inch open end wrench on nut (T), tighten nut (T).
Using 9/16 inch wrench,
install hose (U) to air cleaner.
Using 9/1 6 inch wrench,
tighten nut (V).
Go on to Sheet 8