FUEL SHUT-OFF HANDLE REPLACEMENT (Sheet 2 of 2)
1. Position handle extension (A) in handle (B).
2. Using hammer, tap two pins (C) into holes in
handle (B) to secure extension (A).
1. Thread jamnut (A) onto cable (B).
Thread handle (C) and extension (D) as
an assembly all the way onto cable (B).
Using 1/2 inch wrench to hold extension (D)
and 9/16 inch wrench on jamnut (A), tighten
jamnut against handle assembly (C) and (D).
Close spring (E) to secure handle
(C) in place.
End of Task