HOSE ASSEMBLY (TO PRIMARY FUEL FILTER) REPLACEMENT (Sheet 1 of 2)
1-1/8 in. open end wrench
1-3/16 in. open end wrench
7/8 in. open end wrench
Clean rags (Item 12, Appendix D)
Using 7/8 inch wrench, remove
hose assembly (A) from primary
Using 1-1/8 inch wrench and 1-3/16
inch wrench, disconnect coupler
assembly (B) from hose assembly (A).
C L E A N I N G AND INSPECTION:
Using clean rags, clean hose assembly (A).
Inspect hose assembly (A) for cracks and breaks. If damaged, replace hose assembly (A).
Go on to Sheet 2