FUEL TANK (RIGHT) REPLACEMENT (Sheet 7 of 15)
Continue moving fuel tank to rear until
When draining or filling fuel tank,
front section is clear of crew compartment
post notice that smoking is not
allowed in or near vehicle. Fuel is
A small amount of fuel may still be
in the fuel tank.
container by tilting fuel tank
Using four persons, remove fuel tank
Dry cleaning solvent P-D-680 is toxic and flammable. To prevent personal
injury, wear protective goggles and gloves and use only in a well-ventilated
area. Avoid contact with skin, eyes, and clothes and don't breathe vapors.
Do not use near open flame or excessive heat. The flash point for Type #1
Dry Cleaning Solvent is 100°F (38°C) and for Type #2 is 138°F (50°C). If you
become dizzy while using cleaning solvent, get fresh air immediately and get
medical aid. If contact with eyes is made, wash your eyes with water and get
medical aid immediately.
Use putty knife and dry cleaning solvent
to remove seals (AM) from hull. Clean
area of all adhesive and mask area on hull
where seals had been.
If fuel tank is to be repaired, go to
replaced, go to step 26.
Go on to Sheet 8