FUEL TANK (LEFT) LOWER FRONT MOUNT REPLACEMENT (Sheet 2 of 4)
Using 1/2 inch wrench, remove two screws
and washers (A) holding front mount
(B) to hull floor (C).
Using two 15/16 inch wrenches, loosen
screw (D) and nut (E).
If bracket and mount will not
rotate, loosen upper rear mount
lift fuel tank while rotating mount.
Use hammer if required.
Rotate lower bracket and mount (B) 180
degrees and remove from upper bracket
Using two 15/16 inch wrenches, remove
screw (G), washer (H), nut (J) and lock-
Separate rubber mounts (L) and washers
(M) from bracket (N).
Go on to Sheet 3