FUEL TANKS (LEFT AND RIGHT) UPPER REAR MOUNT REPLACEMENT (Sheet 3 of 3)
Install bracket (A), rubber mounts (B), washers (C) to hull bracket (D) using screw (E),
washer (F), new lockwasher (G) and nut (H). Finger tighten.
Using alining punch, install six screws,
washers, and nuts (J) and finger tighten.
Insert alining punch into hole for screw
(M) facing rear of vehicle and aline
bracket (A) and hull bracket (D).
Using 1/2 inch wrench and 1/2 inch
socket, tighten screws (J).
Remove punch. Install screws, washers,
and nuts (M).
Using two 1/2 inch wrenches, tighten
two screws (M).
Using 15/16 inch socket on screw (E)
and 15/16 inch wrench on nut (H), tighten
Close intake grille doors (TM 5-5420-
End of Task