TURBOCHARGER SHROUDS REPLACEMENT (Sheet 5 0f 6)
Outer Shroud Replacement (Sheet 1 of 1)
l / 2 i n . combination box and open end wrench
l/2in. socket with l/2 in. drive
R a t c h e t with 1/2 in. drive
Procedures for replacement of the left or right
transmission shrouds are similar. Procedures
for the left side are shown.
Using 1/2 inch socket, remove
screw and lockwasher (A).
U s i n g 1/2 inch socket and 1/2
inch wrench, remove three screws,
l o c k w a s h e r s , and nuts (B) securing
o u t e r shroud (C).
Remove outer shroud (C).
Position outer shroud (C) to turbocharger.
Install three screws, lockwashers, and nuts (B) to secure outer shroud (C) to turbocharger.
I n s t a l l screw and washer (A) to secure outer shroud (C) to turbocharger.
U s i n g 1/2 inch socket and 1/2 inch wrench, tighten screws (A and B).
End of Task