TM 5-5420-226-20-3
4. Using 9/16 inch socket or 9/16 inch
wrench, install two screws (E), lockwashers
(F), and flat washers (G).
5. Position clamp (H) on boot (J).
6. Install pipe (A) into boot (J).
7. Using screwdriver, tighten clamp (H).
8. Install two clamps (K) on hose (L).
9. Install hose (L) on engine and pipe (A).
10. Position clamps (K) on hose (L) and using
screwdriver, tighten clamps (K).
11. Install powerplant (page 5-14).
End of Task
10-17
