INSTRUMENT PANEL CLUSTER ASSEMBLY REPAIR (Sheet 6 of 23)
Transmission Oil Pressure Indicator Replacement (Sheet 1 of 2)
TOOLS: 3/8 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURE: Remove instrument panel from vehicle (page 10-111)
1. Remove two leads (circuits 27 and 321) from rear of indicator (A) by Pulling out.
2. Using wrench, remove two nuts (B) and lockwashers (C)
securing indicator (A) and mounting bracket (D) to
3. Remove indicator (A), bezel (E),
and mounting bracket (D).
Go on to Sheet 2