TM 5-5420-226-20-3
INTERCONNECTING BOX ASSEMBLY REPAIR (Sheet 4 of 8)
20. Remove elbow (AG) from box
assembly (C).
ASSEMBLY:
1.
Place elbow (A) in position on
box assembly (B).
2.
Using fingers, install four screws (C),
lockwashers (D), and nuts (E) securing
elbow (A) to box assembly (B).
3. Holding nuts (E) with 11/32 inch wrench,
use screwdriver to tighten four screws (C).
4.
Place lead assembly (F) and gasket (G)
in position on elbow (A).
Go on to Sheet 5
TA168797