TM 5-5420-226-20-3
HIGH VOLTAGE IR POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT
(Sheet 2 of 6)
REMOVAL:
1. Using 7/8 inch wrench, disconnect
cable (A) from power supply (B).
2. Using 1 inch wrench, disconnect
cable (C) from power supply (B).
3. Using 1/2 inch socket and extension remove four screws (D) and washers (E)
securing power supply (B) to mounting pad (F).
4.
Remove clamps (G).
5.
Remove power supply (B) from mounting pads (F).
6.
Remove four lockwashers (H).
Go on to Sheet 3
TA168804
10-153