HIGH VOLTAGE IR POWER SUPPLY AND SHOCK MOUNT ASSEMBLY REPLACEMENT
(Sheet 3 of 6)
Remove power supply (B) from vehicle
Using 7/16 inch wrench
to hold nut (J), use 7/16 inch
socket to remove four screws (K)
and nuts (J) securing power
supply (B) to bracket (L).
Remove ground strap (M), two lock-
washers (N), washer (P), washers (Q),
and washers (R) from bracket (L).
Remove power supply (B) from
Using 1/4 inch wrench to hold
nut (S), use flat-tip screwdriver
(U), and mount (V) from each end of
both brackets (L).
Go on to Sheet 4