TM 20-226-20-3
MASTER RELAY MOUNTING PLATE AND BRACKET REPLACEMENT (Sheet 1 of 2)
9/16 in. socket with 1/2 in. drive
1/4 in. drive punch
TOOLS:
1/2 in. socket with 1/2in.drive
Hammer
Ratchet with 1/2 in. drive
SUPPLIES: Nut (592567) (8 required)
Remove master relay assembly (page 10-138)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Using 1/2 inch socket, remove
two screws (A), and lockwashers
(B) securing bracket (C) to
plate (D).
Remove mounting bracket (c).
2.
and two washers (E).
3.
Using 9/1 6 inch socket, remove
two screws (F), lockwashers (G),
and flat washers (H).
4. Using 9/16 inch socket, remove
two screws (J) and lockwashers (K).
5. Remove plate (D) from vehicle to work
bench.
6. Using hammer and punch, tap out
eight nuts (L). Throw away nuts (L).
Go on to Sheet 2
TA168813
