TM 5-5420-226-20-3
TRANSMISSION OIL PRESSURE TRANSMITTER REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1. Place rags under transmitter.
2. Pull socket of rubber insulated connector (A) from
transmitter cap (B).
3. Using 7/8 inch wrench, remove transmitter (C) from
bushing (D).
4. Using 11/16 inch wrench, remove bushing (D) from transmission socket.
5. Check bushing (D) for cracks and crossed threads. Replace if necessary.
INSTALLATION:
NOTE
Prior to installation, lightly coat male threads of all com-
ponents with sealing compound.
TA168883
Go on to Sheet 3
10-232