TM 5-5420-226-20-3
BATTERY JUMPER CABLE ASSEMBLY REPLACEMENT (Sheet 3 of 6)
Using socket, remove two cap screws
3.
(E) and lockwahers (F) securing two
loop clamps (G) and three battery jumper
cable assemblies (C) to hull floor.
Remove battery jumper cable assembly
4.
(C) from two hull floor loop clamps (G).
Using socket, remove cap screw (H) and lockwasher (J) from each loop clamp (K) securing
5.
..
battery jumper cable assembly to two battery supports (L).
TA168898
Go on to Sheet 4
10-247