TM 5-5420-226-20-3
TRANSMISSION WIRING HARNESS REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
1.
Position wiring harness (A) onto
powerplant as shown.
2.
Place six clamps (B) onto wiring
harness at positions (C).
3.
Position clamps onto studs,
and, using 3/4-inch wrench,
install six nuts (D) securing
clamps (B) to transmission.
Place clamp (E) onto wiring harness at position (F).
4.
Position clamp onto stud and, using 9/16-inch socket, install nut (G) securing clamp (E)
5.
to transmission.
Place clamp (H) onto wiring harness at Position (J)
6.
●
Position clamp onto bracket, and, using two 7/16-inch wrenches, install screw (K), washer
7.
(L), and nut (M) securing clamp (H) to bracket.
TA168934
Go on to Sheet 4
