BASKET WIRING HARNESS DISCONNECT (Sheet 2 of 4)
The following instructions show how to remove the top wiring
harness. If one of the lower wiring harnesses is to be removed, the
connectors for the wiring harnesses above that wiring harness to be
removed, must be removed first, using a spanner wrench.
Tag all harnesses before removal.
Using spanner wrench, loosen nut (A)
on connector (B) at back side of basket
Remove connector (B).
Using flat-tip screwdriver, remove four
connector (E) on front side of basket
disconnect. Remove connector (E).
Remove connector (E) from basket disconnect.
Go on to Sheet 3