TM 5 -5420-226-20-3
HEU FRONT HARNESS REPLACEMENT CON'T (SHEET 8 OF 8)
20.
Route branch of harness assembly (H) along voltage regulator mounting bracket (J).
Using 7/16 inch socket, install screw (K) and t wo new lockwashers (L) securing ground strap
21.
(M) at voltage regulator mounting bracket (J).
22.
Manually connect connector (A) to master relay (B).
23.
Manually connect connector (C) to engine accessory relay (D).
24.
Using 7/16 inch socket, install screw (E) and two new lock-
washers (F) securing ground strap (G) next to engine
accessory relay (D).
25.
Using 7/16 inch socket, install screws (N) and washers (P)
securing straps (Q) that retain harness assembly (H).
26.
Install voltage regulator assembly (page 3- 268.2).
27.
Install commander's floor plate (page 17- 9).
28.
Connect Bulkhead cables (page 10-269).
29.
Connect three battery ground straps (page 10-268 ).
End of Task
Change 6
10-297