TM 5-5420-226-20-3
FUEL TANK CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT (RIGHT)
(Sheet 2 of 5)
Lift cover (B) with fuel pump (D) from tank-
3.
Using fingers, disconnect cable (E) from fuel pump (D) by pulling out.
4.
Rest cover (B) in original position
5.
on fuel tank.
6.
Using fingers, disconnect cable (F) from
electrical connector (G) by pulling out.
7.
Using diagonal pliers, remove lockwire (H)
from screws (J).
8.
Using screwdriver, remove four screws
and washers (J) holding housing (K) to
cover (L).
Slowly separate capacitor and housing
9.
(K) from cover (L). Capacitor and -
housing (K) are connected to cover (L)
with an electrical lead.
Using screwdriver, remove screw (M),
10.
washer (N), electrical lead (P) and
gasket (Q) from adapter (R). Discard
gasket.
11.
Using cutting pliers, remove lockwire
(S) from screws (T).
Using socket, remove eight screws
12.
and washers (T).
13.
Remove cover (U) and gasket (V) from
tank. Discard gasket.
Go on to Sheet 3
10-317
