FUEL TANK CAPACITOR AND HOUSING ASSEMBLY REPLACEMENT (LEFT)
(Sheet 3 of 5)
Using screwdriver, remove four screws (V) and lockwashers (W) from securing adapter
(M) to cover (H). Separate cover (H), gasket (X) and adapter (M).
Discard gasket (X).
CLEANING AND INSPECTION:
Using putty knife, clean all areas where gaskets were mounted.
Cleaning agent specified is flammable. Use only in well ventilated areas. Keep away from
flames, sparks, or heat. Do not smoke while using. Prevent contact with eyes, mouth, and/or
skin. Wear rubber gloves when performing cleaning procedures.
Using dry cleaning solvent and lint-free cloth, wipe gasket surface clear.
Inspect cable and adapter (M) and cover (H) for damage. Replace damaged parts.
Go on to Sheet 4