TM 5-5420-226-20-3
SHIFTING CONTROL BRACKET AND LINK ASSEMBLY REPAIR (Sheet 2 of 11)
REMOVAL:
1.
Remove shaft (A) from link assembly (B).
2.
Using 7/16 inch socket, remove four screws (C) and washers (D) securing spacer (E) and
gasket (F).
Remove spacer (E) and gasket (F). Throw gasket (F) away.
3.
4.
Using 7/16 inch wrench, remove screw (G) in clamp (H).
Remove clamp (H).
5.
Push cable (J) aside.
6.
Go on to Sheet 3
TA169044
11-43
