TM 5-5420-226-20-3
SHIFTING CONTROL BRACKET AND LINK ASSEMBLY REPAIR (Sheet 5 of 11),
7.
Using 3/4 inch wrench, remove nut (J).
Remove link assembly (K).
8.
Using 3/4 inch punch and hammer, remove
9.
bearing (L) from bracket (M).
10.
Using 5/16 inch combination wrench,
remove grease fitting (N).
11.
Using hammer and 1/8 inch punch, remove
pin (P).
Using hammer and 1/2 inch punch, remove
12.
pin (Q).
.
13.
Remove link (R) and two washers (S).
TA169047
Go on to Sheet 6
11-46
