SHIFTING CONTROL BRACKET AND LINK ASSEMBLY REPAIR (Sheet 10 of 11)
Position seal assembly (H) over shield
(J) with holes alined.
Position two flat washers (K) on seal
assembly (H) with holes alined.
Using 7/16 inch socket, install five lock-
washers (L) and screws (M) securing
seal assembly (H) and shield (J) to shield
Position new gasket (N) and spacer (P)
on shield (B) with holes alined.
Using 7/16 inch socket, install four
spacer (P) and gasket (N).
Using grease gun, lubricate link at grease
fitting (S) with type GAA grease.
Go on to Sheet 11