TM 5-5420-226-20-3
TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 2 of 7)
Using two 1/4 inch x 20 NF x 3 inch long bolti
3.
(D.1) and 7/16 inch socket, loosen filter
assembly by installing bolts in holes (E) and
tightening evenly to withdraw filter assembly(C).
4.
Using 7/16 inch socket, remove two 1/4 inch x
20 NF x 3 inch long bolts (D.1) from filters.
NOTE
Lift filter assembly (C) slowly and straight up
to reduce the possibility of oil entering bolt
holes (E.1).
5.
Slowly lift filter assembly (C) straight out of
transmission. Remove and discard gasket (F).
NOTE
Some filters are secured with self locking
nuts and do not require lockwiring.
Using diagonal cutting pliers, remove lockwire
6.
(G), if present, securing nuts on bottom of filter
assembly (C).
Go on to Sheet 3
