TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 7 of 7)
Remove rags from filter assembly holes.
Place new gasket (M) on transmission and
install filter assembly (F).
Ensure 10 bolt holes (M.1) are clean and free of
Install 10 new lockwahers (N) and bolts (P) to
hold filter assembly (F) and clamp bracket (Q)
Using a 9/16 inch socket wrench and torque
wrench, alternately tighten 10 bolts (P) to 26-32
lb-ft (35-43 N·m).
Operate engine and transmission and check for
leaks at gasket.
Install transmission shroud (page 9-6).
End of Task