MASTER BRAKE CYLINDER-TO-BULKHEAD TUBE ASSEMBLY REPLACEMENT (Sheet 3 of 5)
CLEANING AND INSPECTION:
Cleaning agent specified is flammable. Use only in well ventilated areas. Keep away from
flames, sparks, or heat. Do not smoke while using. Prevent contact with eyes, mouth, and/or
skin. Wear rubber gloves when performing cleaning procedures.
Using rags and dry cleaning solvent, clean
Using low pressure air, dry all parts.
Inspect tube reducer (A), tube connecting
nut (B), nipple (C), and tube connecting
nut (D) for worn threads. Replace if
Inspect tube assembly (E) for cracks,
dents or holes. Replace if unservice-
Go on to Sheet 4