TM 5-5420-226-20-3
BRAKE QUICK-DISCONNECT AND HOSE ASSEMBLY REPLACEMENT (Sheet 3 of 7)
Using adjustable wrench to hold tee (M)
8.
and 11/16 inch wrench on nuts of tube
assemblies (H and J), disconnect nuts.
Using 9/16 inch socket, remove screw
9.
(K) and lockwasher (L).
NOTE
Replace screw (K) and lockwasher
(L) after step 10, finger tight, to hold
adjusting screw lock plate.
Remove parts (C, M, N, and P) as an
10.
assembly.
NOTE
It may be necessary to wiggle or pull
tube assemblies (H or J) slightly to
clear tee (M).
11.
Insert plastic plug in nuts of both tube
assemblies (H and J).
Using 13/16 inch wrench to hold coupling
12.
half (C) and 11/16 inch wrench on nut
of tee (M), disconnect and remove tee
(M) from bracket (N).
13.
Using 13/16 inch wrench to hold coupling
half (C) and 7/8 inch wrench on nut
(P), remove nut (P) from coupling half
(C) and bracket (N).
TA169175
Go on to Sheet 4
Change 5 13-49