TM 5-5420-226-20-3
PARKING BRAKE PAWL AND BELLCRANK ADJUSTMENT (Sheet 1 of 4)
TOOLS:
9/16 in. open end wrench (2 required)
15/16 in. combination box and open end wrench (2 required)
Ratchet with 1/2 in. drive
7/1 6 in. socket with 1/2 in. drive
Pry bar
Slip joint pliers
Gage block (2 required)
FABRICATED TOOLS:
1/8 in. drill or welding rod 4 in. long
SUPPLIES:
REFERENCE:
Remove powerplant (page 5-2)
PRELIMINARY PROCEDURE:
ADJUSTMENT
Using 7/16 inch socket, remove eight nuts and eight washers (A) securing covers and
1.
gaskets (B) to each brake housing assembly (C).
TA169254
Go on to Sheet 2