SHOCK ABSORBER LOWER MOUNTING BRACKETS REPLACEMENT (Sheet 1 of 1)
1-1/8 in. socket with 3/4 inch drive
Ratchet with 3/4 in. drive
SUPPLIES: Bushing (4 required)
1. Using socket and ratchet, remove four
2. Using cutting torch, carefully burn away
weld securing bracket (C) to roadwheel arm.
3. Remove bracket (C).
Using grinding tool, remove old weld from
Install four bushings (D) in bracket (C)
Place bracket (C) in position on roadwheel
arm and, using socket and ratchet, secure
bracket with four screws (A) and
Using welding torch, weld bracket (C), along
all sides, to roadwheel arm in accordance to
MIL-STD-1261, class 3 and TM 9-237.
Spot paint welded area (TM 43-0139).
End of Task