TM 5-5420-226-20-3
STEERING CONTROL HANDLE ASSEMBLY REPLACEMENT (Sheet 1 of 2)
TOOLS:
9/16 in. combination box and open end wrench
Hammer
Slip joint pliers
1/8 in. drive punch
REFERENCE: TM 5-5420-226-10
1.
Using 9/16 inch wrench, remove bolt (A) from handle (B).
2.
Push rod (C) to one side.
Using slip joint pliers, remove cotter pin (D).
3.
4.
Using hammer and punch, remove pin (E).
5.
Remove handle (B).
Go on to Sheet 2