TM 5-5420-226-20-3
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 19 of 22)
104.
Using 9/16 inch wrench to hold steering
rod end (BB), use 9/16 inch wrench to
loosen jamnut (BC).
105.
Using 9/16 inch wrench, turn steering rod
end (BB) counterclockwise until screw
(BA) will drop freely through clevis (BD)
and steering rod end (BB).
106.
Using 9/16 inch wrench to hold steering rod end (BB), use 9/16 inch wrench to tighten
jamnut (BC).
107.
Using 9/16 inch wrench, install screw (BA) through clevis (BD) and steering rod end
(BB).
108.
Using socket and torque wrench, tighten screw (BA) to 16 lb-ft (22 N·m).
109.
Using 9/16 inch wrench, loosen jamnut
(BE).
110.
Using hands, turn control rod (BF) coun-
terclockwise until control rod (BF) is not
past witness hole in steering rod end (BG).
TA169409
Go on to Sheet 20
15-49
