TM 5-5420-226-20-3
TOWING PINTLE REPAIR (Sheet 1 of 5)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Disassembly
Cleaning and Inspection
Assembly
Installation
Ratchet with 3/8 in. drive
TOOLS: 1-5/16 in. open end wrench
3-1/4 in. socket with 1 in. drive
Hammer
Ratchet with 1 in. drive
Flat-tip screwdriver
1-1/2 in. socket with 3/4 in. drive
Center punch
1-5/16 in. socket with 3/4 in. drive
3/8 in. drive punch
8 in. extension with 3/4 in. drive
59 to 62 in. pinchpoint crowbar
Ratchet with 3/4 in. drive
5/16 in. socket with 3/8 in. drive
1-1/2 in. open end wrench
Slip joint pliers
Dry cleaning solvent (Item 55, Appendix D)
SUPPLIES:
Cotter pins
Low-pressure air supply (30 psi maxium)
REMOVAL:
1.
Place 1-5/16 inch wrench on each of
the four nuts (A).
2.
Holding nut (A) with 1-5/16 inch wrench
and using 1-5/16 inch socket, remove four
bolts (B), lockwashers (C), and nuts (A).
3.
Remove towing pintle (D) from vehicle.
Go on to Sheet 2