• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
FUEL FILLER COVER ASSEMBLY REPLACEMENT - Continued
INTAKE GRILLE DOOR NO. 2 LEFT AND RIGHT REPLACEMENT

M48A5 Tank Chassis, Transporting: For Bridge, Armored-Vehicle-Launched; Scissoring Type, Class 60 -3 Page Navigation
  909    910    911    912    913  914  915    916    917    918    919  
img
. . . . .
TM 5-5420-226-20-3
INTAKE GRILLE DOOR NO.1 LEFT AND RIGHT REPLACEMENT (Sheet 1 of 1)
TOOLS:
3/4 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
PERSONNEL:
Two
REFERENCE:
TM 5-5420-226-10
PERLIMINARY PROCEDURES:
Launch bridge (TM 5-5420-226-10)
Open No. 5,-4, 3, and 2
intake grille doors
(TM 5-5420-226-10)
REMOVAL:
1.
Using socket, remove screw (A) and
lockwasher (B) from door (C).
2.
Using handle (D), lift door (C) until door
(C) disengages from vehicle.
3.
Using second technician, remove door
(C) from vehicle.
4.
Repeat steps 1 through 3 for opposite
side of vehicle.
INSTALLATION):
1.
With two technicians using handle (A), lift door (B) above vehicle and slowly lower, making
sure bracket (C) fits into slot in vehicle before lowering door (B) to closed position.
2.
Using socket, install screw (D) and lockwasher (E) into door (B) securing door (B) to
vehicle.
3.
Repeat steps 1 through 3 for opposite side of vehicle.
4.
Close Nos. 2, 3, 4, and 5 intake grille doors (TM 5-5420-226-10).
End of Task
16-10






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.