TM 5-5420-226-20-3
INTAKE GRILLE DOOR NO. 2 LEFT AND RIGHT REPLACEMENT (Sheet 1 of 1)
TOOLS: 1-1/8 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Pliers
PERSONNEL:
Two
REFERENCE:
PRELIMINARY PROCEDURES:
Launch bridge (TM 5-5420-226-10)
Open Nos. 5, 4, and 3
intake grille doors
REMOVAL:
1.
Using socket, remove two screws (A)
and lockwashers (B).
2.
Using second technician, lift door (C) with
handles (D) straight up.
3.
Remove door (C) from vehicle.
4.
Repeat steps 1 through 3 for opposite
side of vehicle.
INSTALLATION:
1.
With two technicians using handles (A), lift door (B) above vehicle and slowly lower into
place. Make sure holes in door (B) hinge aline with holes in vehicle.
2.
Using two screws (C) and lockwashers (D), secure door (B) to vehicle. Use socket to
tighten screws.
Repeat steps 1 through 3 for opposite side of vehicle.
3.
Close No. 3, 4, and 5 intake grille doors (TM 5-5420-226-10).
4.
End of Task