CUPOLA COVER HANDLES REPLACEMENT (Sheet 1 of 2)
TOOLS: 7/16 in. combination wrench
15/1 6 in. socket with 1/2 in. drive
Shims (as required)
Open cupola cover (A).
If replacing only outside handle,
go to step 4.
Using wrench, remove two screws (B).
Remove hook (C) and shims (D), if any, from inside handle (E). Retain shims (D) for
Using 15/1 6 inch socket, remove nut (F) and lockwasher (G). Throw lockwasher (G) away.
Manually pull off inside handle (E).
Manually remove woodruff key (H) and retain for installation.
Using hammer, tap out outside handle (J).
Go on to Sheet 2