CLU T CH ASSEM BLY REPLACEM EN T AN D REPAI R (She e t 3 of 9 )
Manually remove bearing (C) and gear (D).
Using 1/4 inch screw key, loosen setscrew (E).
Manually pull out shaft (F).
Using pliers, remove key (G).
Holding two screws (H) with 9/16 inch
wrench, use 9/16 inch wrench to remove
two nuts (J).
Manually remove two screws (H) and
Separate two halves of collar (L) and
remove from sleeve (M).
Using 7/16 inch wrench, remove lubrication
from ring (P).
Remove locating pin from pin (A).
Using flat-tip screwdriver, remove three screws (Q) securing cover (B) to attached
Go on to Sheet 4