TM 5-5420-228-24
CUPOLA COVER HANDLES REPLACEMENT (LATE MODEL CUPOLA) (Sheet 1 of 2)
TOOLS: 7/16 in. combination wrench
15/16 in. socket with 1/2 in. drive
Hammer
Shims (as required)
SUPPLIES:
Lockwasher
PERSONNEL:
REMOVAL:
Open cupola
1.
NOTE
If replacing only outside handle,
go to step 4.
Using wrench, remove two screws (B).
2.
Remove hook (C) and shims (D), if any, from inside handle (E). Retain shims (D) for
3.
installation.
Using 15/16 inch socket, remove nut (F) and lockwasher (G).
4.
Manually pull off inside handle (E).
5.
Manually remove woodruff key (H) and retain for installation.
6.
Using hammer, tap out outside handle (J).
7.
TA251422
Go on to Sheet 2