• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
SCISSORS CYLINDER RELIEF VALVE (RV8) AND FLOW REGULATOR (PCV3) REPLACEMENT (Sheet 1 of 4)
SCISSORS CYLINDER RELIEF VALVE (RV8) AND FLOW REGULATOR (PCV3) REPLACEMENT (Sheet 3 of 4)

Launcher Hydraulics System M48A5/M60A1 Tank Chassis, Transporting: For Bridge, Armored-Vehicle-Launched; Scissoring Type, Class 60 Page Navigation
  269    270    271    272    273  274  275    276    277    278    279  
img
TM 5-5420-228-24
SCISSORS CYLINDER RELIEF VALVE (RV8) AND FLOW REGULATOR (PCV3) REPLACEMENT
(Sheet 2 of 4)
4.
Holding relief valve "RV8" (G) with 15 inch
adjustable wrench, use 12 inch adjustable
wrench to remove elbow (H) and collar "CF2"
(J) from relief valve "RV8" (G).
5.
Holding bushing (K) with 1-3/8 inch wrench,
use 1-1/8 inch wrench to remove adapter (L)
and collar "CJ" (M) from bushing (K).
Remove relief valve (G) and attached parts
6.
from welded brackets (N) and place in vise.
7.
Holding elbow (P) with 12 inch adjustable
wrench, use 1-1/8 inch wrench to remove
adapter (Q) and collar "CG" (R) from
elbow (P).
8.
Using 12 inch adjustable wrench, remove
elbow (P) from relief valve "RV8" (G).
Holding flow regulator "PCV3" (S) with 15
9.
inch adjustable wrench, use 1-3/8 inch wrench
to remove bushing (K) from flow regulator
"PCV3" (s).
Holding bushing (T) with 1-3/8 inch wrench,
10.
use 15 inch adjustable wrench to remove
flow regulator "PCV3" (S) from bushing (T).
Holding nipple (U) with 1-1/8 inch wrench,
11.
use 1-3/8 inch wrench to remove bushing (T)
from nipple (U).
12.
Using 1-1/8 inch wrench, remove nipple (U)
from relief valve "RV8" (G).
13.
Remove relief valve "RV8" (G) from vise.
TA251505
Go on to Sheet 3
3-107






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.