TM 5-5420-228-24
OVERHEAD CYLINDER HOSE ASSEMBLIES (CL, CM, CN, AND CO) AND HYDRAULICS
REPLACEMENT (Sheet 2 of 8)
4.
Holding tee (F) with 12 inch adjustable
wrench, use 1-1/8 inch wrench to remove
adapter (C) and collar (G) from tee (F).
Holding elbow (H) with 1-1/8 inch wrench,
5.
use 1-1/4 inch wrench to remove hose
assembly (J) from elbow (H).
Holding tee (F) with 12 inch adjustable
6.
wrench, use 1-1/8 inch wrench to remove
elbow (H) and collar (K).
7.
Holding nipple (L) with 1-1/8 inch
wrench, use 12 inch adjustable wrench
to remove tee (F) from nipple (L).
Holding elbow (M) with 12 inch adjustable
8.
wrench, use 1-1/8 inch wrench to remove
nipple (L) from elbow (M).
Using 12 inch adjustable wrench, remove
9.
elbow (M) from relief valve (N).
Holding adapter (P) with 1-1/8 inch wrench, use 1-1/4 inch wrench
10.
to remove hose assembly (Q).
Holding relief valve (E) with 15 inch adjustable wrench, use 1-1/8 inch wrench to remove
11.
adapter (P) and collar (R).
12.
Using 12 inch adjustable wrench, remove elbow (S) and attached nipple (T) and relief
valve (E) from overhead cylinder (U).
13.
Using care not to cause damage, clamp relief valve (E) in vise.
Holding nipple (T) with 1-1/8 inch wrench, use 12 inch adjustable wrench to remove
14.
elbow (S) from nipple (T).
15.
Using 1-1/8 inch wrench, remove nipple (T) from relief valve (E).
16.
Remove relief valve (E) from vise.
17.
Holding elbow (V) with 12 inch adjustable wrench, use 1-1/4 inch wrench to remove hose
assembly (W) from elbow (V).
18.
Holding elbow (X) with 15 inch adjustable wrench, use 12 inch adjustable wrench to remove
elbow (V) and collar (Y).
Go on to Sheet 3
TA251524
3-126