SCISSORS CYLINDER HOSE ASSEMBLIES (CF1, CF2, CG, CI, AND CJ) AND HYDRAULICS
REPLACEMENT (Sheet 8 of 12)
Holding nipple (G) with pipe wrench, use 1-
5/16 inch wrench to install quick disconnect'
socket (K) to nipple (G).
Place clamp (L) in position over quick
disconnect socket (K).
Using 1/2 inch socket, install three screws
Place relief valve "RV8" (P) in vise.
Using 12 inch adjustable wrench, install
elbow (Q) into relief valve (P).
Using 1-1/8 inch wrench, install nipple (R)
into relief valve (P).
Holding nipple (R) with 1-1/8 inch wrench,
use 1-3/8 inch wrench to install bushing (S)
onto nipple (R).
Install regulator "PCV3" (T) with flow
arrow pointing away from relief valve (P).
Holding bushing (S) with 1-3/8 inch wrench.
use 15 inch adjustable wrench to install
regulator "PCV3" (T) onto bushing (S).
Holding regulator "PCV3" (T) with 15 inch
adjustable wrench, use 1-3/8 inch wrench
to install bushing (U) into regulator (T).
GO on to Sheet 9