LOCKING CYLINDER HOSE ASSEMBLIES (CE1, CE2, AND M) AND HYDRAULICS REPLACEMENT
(Sheet 2 of 4)
Holding tee (E) with adjustable wrench, use
adjustable wrench to remove four elbows (A)
and four collars (F).
Holding nipple (G) with 3/4 inch wrench, use
adjustable wrench to remove tee (E).
Using 3/4 inch wrench, remove nipple (G).
Using 3/4 inch wrench to hold two elbows
(H), use 7/8 inch wrench to remove hose
assemblies "CE1" (C) and "CE2" (D).
Using 3/4 inch wrench to hold elbows (H), use
7/8 inch wrench to loosen elbow nuts (J).
Using 3/4 inch wrench, remove two
elbows (H), elbow nuts (J), flat washers
(K), and preformed packings (L). Throw
away preformed packings (L).
Go on to Sheet 3.