TM 5-5420-228-24
HEU LOCKING CYLINDER HYDRAULIC HOSES "AJ", "AK", "AL", "BZ"
REPLACEMENT (Sheet 1 of 7)
PROCEDURE INDEX
Procedures
Page
Removal
Installation
TOOLS:
12-in. Adjustable wrench
Ratchet with ½ in drive
13/16-in. open end wrench
9/16- in socket with ½ in. drive
SUPPLIES: Drip pans (suitable containers)
Pencil (Item 22, Appendix D)
Preformed packing (14 required)
Protective caps and plugs (assorted sizes)
Rags (Item 12, Appendix D)
Masking tape (Item 18, Appendix D)
Pipe tape (Item 19, Appendix D)
REFERENCE: LO-12
PRELIMINARY PROCEDURES: Zero hydraulic pressure (page 3-70.5)
Remove front hose armor (page 3-133)
REMOVAL:
NOTE
Use rags and drip pans to catch excess hydraulic fluid. Use masking tape to tag
lines for installation. Cap or plug all lines and fittings as they are disconnected.
1.
Hold elbow (A) with adjustable wrench and use wrench to disconnect hose assembly "AJ" (B) from
elbow (A).
2.
Use adjustable wrench to remove elbow (A) from port "CE1" on front glacis. Remove preformed
packing (C).
Go on to Sheet 2