TM 5-5420-228-24
HEU EJECTION CYLINDER HYDRAULIC HOSES "AM", "AN", "AP", "AQ", "AW", "AX"
REPLACEMENT (Sheet 3 of 8)
7.
Hold tee fitting (K) with adjustable wrench and use wrench to remove hose assembly "AQ" (J) from tee fitting (K).
8.
Use socket and ratchet to remove five screws (L) from clamp (M). Separate clamp (M) and remove hose assembly
"AQ" (J) from clamp (M). Remove bushing (N) from hose "AQ" (J).
9.
Hold tee fitting (D) with adjustable wrench and use wrench to disconnect hose assembly "AP" (P) from tee fitting (D).
10. Hold elbow (Q) with adjustable wrench and use wrench to disconnect hose assembly "AP" (P) from elbow (Q).
11. Using adjustable wrench, remove elbow (Q) from ejection cylinder "ED" (R) and remove preformed packing (C).
12. Use socket and ratchet remove eight screws (S) from clamps (T). Separate clamps (T) and remove hose assembly "AP"
(P) from clamps (T). Remove bushings (U) from hose "AP" (P).
13. Use adjustable wrench hold tee fitting (D), and using wrench disconnect hose assembly "AW" (V) and remove
preformed packing (C).
P
Go on to Sheet 4
3-204.22
Change 3