• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
HEU HOSE ASSEMBLY "BW" REPLACEMENT (Sheet 1 of 1)
HEU HOSE ASSEMBLY "BY" REPLACEMENT (Sheet 2 of 2)

Launcher Hydraulics System M48A5/M60A1 Tank Chassis, Transporting: For Bridge, Armored-Vehicle-Launched; Scissoring Type, Class 60 Page Navigation
  422    423    424    425    426  427  428    429    430    431    432  
img
. . . . . .
TM 5-5420-228-24
HEU HOSE ASSEMBLY "BY" REPLACEMENT (Sheet 1 of 2)
PROCEDURE INDEX
Procedures
Page
Removal
3-204.56
Installation
3-204.57
TOOLS:
1/2-inch drive ratchet
3/4-in. socket with 1/2-inch drive
SUPPLIES:
Drip pans (suitable containers)
Preformed packing (as required)
Lockwasher (8 required)
Rags (Item 12, Appendix D)
REFERENCE: LO-12
PRELIMINARY PROCEDURES:
Drain hydraulic reservoir (page 3-74)
Pump bracket cover removed (page 3-65)
REMOVAL:
NOTE
Use drip pans and rags to catch hydraulic fluid trapped in lines.
1.
Use socket and ratchet to remove four bolts (A) and lockwashers (B) from two flanges (C) and remove hose
assembly "BY" (D) from side of filter housing (E).
2.
Use socket and ratchet to remove four bolts (F) and lockwashers (G) from two flanges (H) and remove hose
assembly "BY" (D) from side of hydraulic pump (J).
3.
Remove preformed packings (K) from flanges on hose "BY" (D).
Go on to Sheet 2
3-204.56
Change 3






Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.