Se c t ion I V . H Y DRAU LI C CY LI N DERS
OV ERH EAD CY LI N DER ARM OR REPLACEM EN T (She e t 1 of 2 )
9/16 in. socket with 1/2 in. drive
15/16 in. socket with 1/2 in. drive
9/16 in. combination box end and open end wrench
Lifting device (200 lbs capacity)
Lockwashers (6 required)
Using 9/16 inch socket on screw (A) and box
wrench on nut (B), remove two screws (A), nuts
Using 15/16 inch socket, remove four screws (F),
flat washers (G), and lockwashers (H).
Keep personnel clear and out from under
lifting device during lifting operation.
Failure to do so could result in personnel
being struck and seriously injured.
Attach sling to forward end of armor (J) and
attach lifting device.
Using pry bar, raise rear end of armor (J) enough
to get hooks of sling through fastener holes
at rear end of armor.
Using lifting device, remove armor (J).
Remove sling from armor (J).
Go on to Sheet 2