HOLD-DOWN CYLINDER ARMOR REPLACEMENT (Sheet 1 of 1)
3/4 in. combination box and open end wrench
3/4 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Using socket on screw (A) and wrench on nut
(B), remove three screws (A), nuts (B), and
Pull armor (D) forward, then up, and remove from
Position armor (D) on vehicle and slide it
rearward to aline holes.
Insert three screws (A).
(B) on three screws (A).
Using socket on three screws (A) and wrench on nuts (B), tighten screws (A).
End of Task